TGC Slab stand holder Single (1 card)

Print your own TGC Slabs stand (initially made for Hermicraft Alt-Art collection).

Version Single (mono) slot (1 card).

There is two sub-release available :

• Stand-Mono-LIGHT → With a depth of 6.80mm for the slot
• Stand-Mono-LIGHT-TIGHTER → With a depth of 6.40mm for the slot

You'll also find some “Spacer”, only needed if the card move too much in its slot (you can also use some pieces of paper).

I also still included two "Test print" models to check the result with only one slot.

PLEASE NOTE : As this is already a “one slot version”, you'll not gain a lot by printing those first 🙂
Stand-TestPrint-LIGHT → With a depth of 6.80mm for the slot
Stand-TestPrint-LIGHT-TIGHTER → With a depth of 6.40mm for the slot

Print Settings

• Printer brand:

Creality

• Printer:

CR10S PRO

• Rafts:

Doesn't Matter

• Supports:

No

• Resolution:

0.20mm

• Infill:

20%

• Filament brand:

NA

• Filament material:

PLA

From 4+3 to a single slot for only one card