Dive-X Scooter Stand Combo

V7 update: modified hole for easier insert of  1" PVC.

This is a simple Scooter stand that will support all DiveXtras scooters. It will work with Black Tip (note BT) for 168mm diameter tube, and larger scooters like Piranha and Cuda that is 205mm diameter (note P). Print two of these and run 2 X  1" PVC tube between the print. Use a Bungee around the mount and the scooter to hold the scooter in place when you are on a boat to keep it in place.

PVC tube hole is tight, you may want to do a light sanding if you wish. I preferred this over loose hole to keep it from moving around during traveling…

Printed using PETG.

No support needed. Print with Label facing up flat.