Logitech M100 Retro Case

I'd like to present my little weekend project.
Vintage computer mouse casing for Logitech M100 mouse.
I chose a popular Logitech mouse for the project. I wanted the mouse to be affordable, accessible, and at the same time work very well.

Features:

• Custom retro design inspired by the first computer mouses
• Build-in custom brims and supports
• Easy to print and assembly

Printing:

The design has built-in supports and brims that are very easy to remove after printing.
For best results, I recommend adjusting the orientation of the object on the printing plate to match the fill angle.
For the best visual effect, I recommend using sandy, gray, and light brown filament colors. The mouse also looks very nice in the transparent filament.

Commercial use:

To sell prints of this and my other models, you must be a Retron Print Commercial Club member.

Before you buy:

• Be aware that the case is angular. It will not be as comfortable and ergonomic as contemporary round designs.
• The mouse has a red LED light. Some filaments may transmit light. At night, the housing may glow red, which can be an advantage as well as a disadvantage (See photo). To block the light, you can cover the LEDs with duck tape

Compatible with:

• Logitech M100
• Logitech M90
• Logitech B100

Updates:

• v 1.1
  • Much better hinge
  • Dedicated glue points
  • Deeper connection pockets
• v 1.2
  • Added screw socket (no more glue required)
  • Added print PDF guide
  • Softer buttons
  • Minor detail fixes
• v 1.3
  • New latch part
  • Stronger base plate
  • Dedicated sliders spot 

Project website:

Vintage mouse 3D Print project