This Is my version of the E11-D blaster from star wars which is used by the Death troopers seen in ''Rogue One'' And ''The Mandolorian'' series. It is fully functional using the AAP01 Airsoft replica will also fit a tracer unit and a sling can be attached.
highly reommand a cocking handle (with or without fire selector)
Hardware Needed:
M4x20 socket head x4
M4x12 socket head x11
M4x10 set screw x2
M4x20 countersunk screw x4
M4 nuts x2
M4 treaded inserts x20
M4x16 hex head x2
8mm rod 220mm long (treaded rod will work but won't look as good)
30mm pipe 185mm long
Print settings i used:
I used a 0.6 and 0.4 mm Nozzles and both work fine for this model.
Layer Height: doesn't matter
Perimmiters: 5
Infil; 20%
suppor: some but not al parts
Material: petg for all except the left and right Reciever I used PCCF but ABS or ASA schould work fine (you want a material with very good layer adhesion)
The author marked this model as their own original creation.