Sekiro - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black
PLA+ Flashforge Purple
PLA+ Sunlu Red 
PLA+ Sunlu Pure Yellow 
PLA+ Sunlu White 

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Purple
At layer #7 (0.64mm) swap to Red
At layer #14 (1.2mm) swap to Pure Yellow
At layer #21 (1.76mm) swap to White for the rest.