Power Supply Universal

DIY build of power supply for 24V 25A or 600W.

Contains three XT60 slots, PD Type-C/A USB, and two Digital Laboratory Converters.

Materials:

• Digital Laboratory Converter - 2x
• Power Supply 24V 25A - 1x
• 60W Quick Charge QC3.0 USB+PD - 1x
• 2 Positions Connector - 2x
• 4010 Fan 12V - 2x
• KSD9700 45C 10A - 1x
• Banana Sockets - 2x Pairs (Red and Black)
• Banana Plug and Alligator Clip - 2x Pairs
• Amass XT60E-F - 3x
• Wires 12/14 AWG - 1-2meters

I was using M2 M3 from “Hex Screw Set" with Round Head.

Power Supply has slots for 3 pairs of connections, 2 of them I was using for Digital Laboratory Converters and one of them for 3x XT60 sockets and PD Quick Charge.

The Fans I connected directly to the power supply's fun and attached KSD970 45C to the same place for positive wire like a switcher. 

Printed in PETG/coPET 0.2 layers height, 15% infill. supports required for the front side.