360° Magnetic Poseable Batman

Fully Posable Batman Using Magnets. 

There are Two Sets of Heads Including, Masked Batman and UnMasked Bruce Wayne. There is also two Sets of Hands being Open Palm Hands and Closed Fists.

Assembly is Required. I believe the entire figure outright required 12 (2mm Diameter) Nails and 28 (6mm Diameter, 2.5 mm Depth) Magnets. Cape was Fully Designed Separately and Glued On. I've Included an Image of the Cutout I used for that. SuperGlue was Required to keep Magnets in place.

All Parts were Printed on the Bambu. I believe every Part was Printed with a 0.20mm Layer Height, 60% Infill Density, and Support On. 

Be Warned, if you Wish to Print these Models, I would Recommend Slightly Editing it Yourself to make it have more Spacious Gaps at the Joints (Especially in the Legs). I would have Loved to Edit Parts Myself and make Multiple Iterations, but this was a School Project and I had a Deadline to meet.

The Shoulder Joints were Based off of A Spectacular SpiderMan Figure I own which had the same sort of movement I was looking for, without out right using Ball Joints, which never seemed to work.

As of Now, the Spare Parts have Nowhere to go as I've yet to design a proper Container to hold them. For now, they'll just sit in the makeshift toy box, that I had to create as well for this 3D printing school project.