Screw Mounted TS100 Soldering Iron Holder For Ikea Skadis

This model holds a TS100 soldering iron in place on the Ikea Skadis board.

The mounting method used is with one M3 screw and nut for easy installation.
The M3 nut is originally too small for the board holes so you'll have to print the included spacer model one time.

Instructions:
1. Print the holder model 1 time.
2. Print the spacer model 1 time.
3. Assemble the holder model onto the Skadis board and use the spacer behind the board.