Wemos D1 mini dual base zip-tie mount

Meant for mounting in a garage, can be used anywhere a zip-tie or single screw/nail mounting is needed.

Wemos/Lolin D1 mini found here: https://www.wemos.cc/en/latest/d1/d1_mini.html

Dual base (doubler) found here: https://www.wemos.cc/en/latest/d1_mini_shield/dual_base.html that actually mounts to the print

Tested with older non-proto board version, likely will work with V2. If you try it, please let me know your thoughts.