K1 / K1 Max Bushing Remover Helper

My printer came with resonance on the X-axis, and I was instructed to perform cleaning.

With this print, it's possible to easily remove the bushing without damaging the axis or the bushing.

The usage is simple, after disassembling the necessary parts:

• Press the print to fit onto the axis
• Rotate the printed piece to avoid the screw (if you've removed the screw from only one side)
• Push

It's normal to experience some resistance while removing the bushing, but no tools are needed.

*In my case, the lower bushing was completely stuck inside and couldn't be removed.