Mini Disc Shooter (Print in Place)

**Update 12/29 - Didn't realize the disc was missing. It was originally in the 3mf file, but the bambu ones don't open in Prusa Slicer so in the confusion of removing the non-compatible 3mf file the disc was left out.  It's been added back in along with a 4 disc file and gcode to print the shooter and disc for the Mini, MK4 and Prusa XL.

----

Print in Place - Great Range - Don't Shoot at anything living (Duh)

Recommended Settings:

around .15mm layer height - 6 walls - 15% infill

*Could be printed faster at .20mm or .25mm

**I printed in PLA, but PETG may or may not be better

Either way would be a good print if you have some time while prepping another big one or want to finish out a roll of filament.