2 Piece Sample Filament Spool
Description
PDFEquilateral Triangle Filament Spool
Updated 3 new v5
Requested by studiodave56, who waned a spool for 1+ Kilograms of filament. Dimensions “200mm outer size with a 67mm total width and a 53mm inside hole”. The image of the printed spool was supplied by him, as I did not print it myself.
- v5 - 200mm Outer DIA - 90mm Spool DIA - 53mm Inner DIA - 7mm Wide - Top
- v5 - 200mm Outer DIA - 90mm Spool DIA - 53mm Inner DIA - 60mm Wide - Bottom
Updated 2 new v3 & v4
2 New version using less filament and have a uniform Thread. Both with the dimensions 180 MM Outer - 90 MM Center - 55 MM Inner Diameter.
- v3 - 180mm Outer DIA - 90mm Spool DIA - 55mm Inner DIA - Top
- v3 - 180mm Outer DIA - 90mm Spool DIA - 55mm Inner DIA - Bottom
- v4 - 180mm Outer DIA - 90mm Spool DIA - 55mm Inner DIA - Top
- v4 - 180mm Outer DIA - 90mm Spool DIA - 55mm Inner DIA - Bottom
Original Versions
2 Versions of a 2 Piece Sample Filament Spool. The idea of the Hexagon spool is great but all those individual hexagons take forever to print. I though a repeating pattern of equilateral triangle would be quicker to print, give an interesting pattern, and allow for enough holes to thread the filament.
- v1 - 135mm Outer DIA - 55mm Inner Spool DIA - Top
- v1 - 135mm Outer DIA - 55mm Inner Spool DIA - Bottom
- v2 - 180mm Outer DIA - 75mm Inner DAI - Top
- v2 - 180mm Outer DIA - 75mm Inner DAI - Bottom
All models were design in TinkerCad.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
The only thing I took from this model was the idea of the 2 piece screw together spool. The designed is otherwise original. It is simple 2 Rings with 4 Isosceles triangle intersecting to make a pattern.
