Gen2 Drawer for Customizable Filament Swatches

This model brings together the Gen2 drawers by Jerrari and the customizable Filament swatches by Makkuro. I find both systems extremely useful and use them a lot for my printing activities, so now it's time to give these swatches a home in my Gen2 setup.

The drawer dimension is the same as for the standard single drawer. You will need to print the corresponding case/rail/lockers that are available on the original Gen2 model page of  Jerrari.

The drawer is designed to accept the default swatch size of 79.5x30x2.2 mm and has a capacity of 40 swatches in total. Due to the width constraint of the drawer, I needed to align them along the long axis. Therefore, I tilted them upwards so you can easily lift them with one finger.

Happy printing!

Added an internal structure that perfectly accepts 40 pieces of the customizable filament swatches by @Makkuro (at the default size of 79.5x30x2.2 mm) with a slight tilt for easy access.