Pot or jar lid - All sizes between 50 and 150mm outer diameter

Maturity: Good

• 4 prototypes.
• In use since 2021/11.

I made those lids because the original ones made of glass dropped on the floor and broke.

The lid consists in two parts bottom and top that are fixed together by gluing. I did that way to avoid support and hide bridging.

The reference diameter to take is the internal diameter of the pot. For example if your pot has an internal diameter of 89mm, you take the lid with lower ID then ID88. The outer diameter of the lid is 5mm greater thus 93mm.

PLA is good.