Apple Watch Charger Stand - Spigen based

Apple Watch charger stand based on the Spigen S350 design.
15
137
1
409
updated December 12, 2023

Description

PDF

Disclaimer: Although I designed this from scratch, the originality of the design lies with Spigen. I saw similar model(s) uploaded to other model sharing platform and I assumed sharing this does not violate any copywrite law. In case it does, anyone who might know, please let me know and I will remove the model.

 

As the title suggest, a charger stand that works well with an Apple Watch. I quite like the design from Spigen, and have a 3D printer, so this was a nice evening design project. I have tested up to 45mm models and it works well.

 

Tips: 

  • I used 0.15 layer height, with 2 perimeters and 15% gyroid infill. Other combination should work just fine though.
  • Place the model facing forward on the build platform, and set the seam alignment to the rear (assuming PrusaSlicer or a derivative is used).
  • I also added 4 small rubber feet at the bottom to create better traction with the surface. This, or any similar method is highly recommended, otherwise the charger cable will dictate where the stand sits.

 

Attributions:

  • Design idea: Spigen
  • Apple Watch CAD (also used for the rendering): https://grabcad.com/library/apple-watch-series-8-45mm-1
  • Apple Watch Charger CAD: https://grabcad.com/library/apple-watch-magnetic-charging-cable-1

Tags



Model origin

The author marked this model as their own original creation.

License