Holder for curtain rod for plastic tube (Ø x L: 11.5 x 1,000 mm, thickness: 1.5 mm, rigid PVC, white)
The holder is simply hung from above over the open window casements. Logically, you need two holders for a curtain rod.
A single holder can also be used to hang a window picture at Christmas, for example.
I printed the holders from white PLA. They have now been hanging inconspicuously on several windows for several years and hold the curtains there.
The tubes are available from DIY stores. These are the one meter long white plastic tubes. They are usually located near the aluminum and plastic profiles. The cost of such a tube is less than two euros per meter (as of 12/2023). The pipes can be cut with a sharp knife.
Here, for example, https://www.bauhaus.info/metallprofile-kunststoffprofile/kantoflex-rundrohr/p/10520755
With the FreeCAD file, you can make any desired changes yourself.
------------------------------------------------------------------------------
Halter für Gardinenstange für Kunststoff-Rohr (Ø x L: 11,5 x 1.000 mm, Stärke: 1,5 mm, Hart-PVC, Weiß)
Der Halter wird einfach von oben über den offenen Fensterflügen gehangen. Für eine Gardinenstange braucht man logischerweise zwei Halter.
Mit einem einzelnen Halter kann man z.B. zu Weihnachten auch ein Fensterbild aufhängen.
Gedruckt habe ich die Halter aus weißem PLA. Sie hängen mittlerweile mehrere Jahre unauffällig an mehreren Fenstern und halten dort die Gardinen.
Die Rohre gibt es im Baumarkt. Dabei handelt es sich um die ein Meter langen weißen Kunststoffrohre. Die stehen meistens in der Nähe der Alu- und Kunststoff-Profile. Die Kosten für ein solches Rohr liegen für einen Meter unter zwei Euro (Stand 12/2023). Die Rohre können mit einem scharfen Messer geschnitten werden.
Hier z.B. https://www.bauhaus.info/metallprofile-kunststoffprofile/kantoflex-rundrohr/p/10520755
Mit der FreeCAD-Datei kann jede gewünschte Änderung selbst vorgenommen werden.
The author marked this model as their own original creation.