7 Zoll Display Frame and Stand

A frame and stand for a 7 zoll display.

The display type is shown in the attched pictures. Display size 165 x 87 x 9 mm, screw hole distance 157 x 115.

Two backplanes are avalable:

The first is prepared to mount a raspberry pi zero 2 (horizontal) or a raspberry pi 2,3,4,5 (horizontal, vertical) without case.

The second is empty. Design it for your need.

*Screws and Nuts needed* Set 1

• Cylinder Head Screws*: M3 x 8, number of pieces: 14
• Nuts: M3, number of pieces: 14

Set 2

• Hexagon Head Screws: M5 x 18, number of pieces: 2
• Nuts: M5, number of pieces: 2

Set 3

• Cylinder Head Screws*: M2.5 x 12, number of pieces: 4
• Nuts (8 as spacer) M2.5, number of pieces: 12

(*) Cylinder Head Screws can be slotted/cross-head/allen

*Mouting Order*

1. Display onto Frame (4 x Set 1)
2. Raspberry onto Backplanel (4 x Set 3)
3. Stand onto Display Backplanel (4 x Set 1)
4. Frame onto Backplanel (6 x Set 1)
5. Locking Knob for Stand (2 x Set 2)

*Print settings*

• Nozzle: 0.4

*Stand*

• Filament: PLA or PETG
• Infill: 20%
• Support: everywhere
• Bed adhesion: non

*Locking Knob*

• Filament: PLA or PETG
• Infill: 20%
• Support: non
• Bed adhesion: non or Brim

*Backplanel*

• Filament: PLA or PETG
• Infill: 20%
• Support: yes
• Bed adhesion: non

*Display Frame*

• Filament: PLA or PETG
• Infill: 20%
• Support: yes
• Bed adhesion: non