Lorcana Lore Counter

The original stl is designed for a resin printer so I had some issues trying to print it on my Prusa MK4. To make it look better I made some modifications and I remixed the files to eliminate as much support as possible. Supports for the top are still necessary. I used organic support and carefully removed it with a knife.

Printed with a 0.25 nozzle using the default 0.10 mm QUALITY settings in Prusa Slicer. I also used ironing for the details and used a color change. I included the 3mf files with these settings. 

I recommend using a piece of painters tape between the base and the wheel. This makes the fit nice and snug.

I also printed a test model with a 0.4 nozzle with 0.15 layer height and it looks quite good. I used paint to make the numbers stand out more. (See last picture)

Original design by JASONMAKESMINIS

• Made printing without support possible for the base and wheel
• Removed the castle on the top plate
• Repaired some imperfections in the original file