Hammer Head - Soft Head for Watchmaker's Hammer

This is a simple but useful print to add a “soft head” to a small hammer (often sold as a “Watchmaker's Hammer with Six heads” - see photos).

The hammer head is printed in TPU and simply screws on - no threading required.

Note : I often find this type of small hammer useful for tapping in plastic pegs, and other operations where 3D printed parts need a little gentle persuasion to fit together.

Print Instructions

Print in TPU using the 3mf file provided; otherwise :

• 0.2mm layer height
• 4 perimeters
• 0% infill

CAD

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/644ea4d81a96af8be39172ae/w/c123bc66a8da601e01a2700f/e/4b780a6f726f0ccbfe139ec6?renderMode=0&uiState=65771dfa3e56ba423854b38e