Model info
The model was used as a Chromebox holder under the shelf.
It was captured by a hole in the profile, but the removal is not good enough, so there is a second version with holes, which is designed for better removal.
2 Models: With screw holes | Without screw holes
Printer: Creality K1 MAX (300x300x300) mm
Material: Optional, but I used PETG for extra strength
Print instructions
The recommended print settings are:
- Layer height: 0.2 mm
- Perimeters: 4 perimeters (important, to make the links strong)
- Infill: 15%
- Material: Optional, but I used PETG for extra strength
- Expected printing time: my setup took 2.15H to print
Tags
The author marked this model as their own original creation.