WobbleX WS8 Adapter for Elegoo Neptune 4 Pro

No one made an adapter for the WobbleX z-wobble management system, and the basic file doesn't fit in its designed orientation. I've modified the screw positions and hacked off a little of the geometry to give it the clearance it needs. Requires two M3x10mm screws per adapter (two adapters per lead screw).

No supports necessary. Printed in PLA.

WobbleX WS8 (you will need two) can be found at https://s.click.aliexpress.com/e/_DDdeMyP

Generic mockup contacted X/Z frame, reshaped and rotated connection points to clear the printer frame.