Anycubic i3 Mega Cable Guide for Direct Drive

This is a cable guide for the Anycubic i3 Mega line of printers. I decided to eliminate the bowden tube and set up a direct drive feeding system. After moving the extruder above the hotend I needed a way to manage the cable and keep it up off the print. I designed this cable guide to position the anchor point for the cable centered above and right behind the extruder stepper motor. The first one I made has the clamp to the side behind the stepper motor and I decided that moving the clamp over so it was centered on the motor would be a better position. So, I reworked the .stl to reflect that change.