V-Core 3.1 Metal XY Joiners X Endstop

This is an adjustable X endstop for the RatRig V-Core 3.1 that is secured to the metal XY joiners by the 2 unused holes on the lefthand xy joiner.

This was specifically designed for use with the VZBot CNC Toolhead, but EVA3/2 should work just fine as well. 

BOM

• 2 M3 heat-set inserts
• 2 M3x6 screws
• 2 M5x12 screws
• 2 M5 Nuts

Assembly

Just print both parts, use 2 M3 heat-set inserts for the base part that screws to the xy-joiner, then use 2 M3x6 screws to secure the ‘endstop’ to the base.

Secure the base to the xy-joiner with 2 M5x12 screws and nuts.

Happy printing!