All parts should be printed simultaneously, assembled as shown in the photos. The arrangement of the parts must be precise to allow parts to rotate.
Material: PLA
Print: 0.2mm
Nozzle: 0.4mm
Support: Yes
Brim: Not needed
Infill: Yes, 30% to ensure sturdiness
Feel free to size it up or down as you wish
A tip: If you want to get this print easily off your heat bed, place the heat bed with the printed model in the freezer for 10 to 30 mins. Take it out, and it should pop off quite easily :)
Printed on Ender-3 V2.
The author marked this model as their own original creation.
