Christmas Tree Topper

This light-weight design fits snuggly onto the top branch of a Christmas tree. The diameter is 9 mm, but the design scales well. Merry Christmas! :)

Printing:

There are no difficult overhang angles, but due to the small first layer, the design needs support for better bed adhesion. I'm not a big fan of supports in general, but you'll want to add them here! I've attached images showing the position of the organic supports in the lower part of the design.

Nozzle: 0.4 mm

Layer Height: 0.2 mm

Supports: Yes. Painted-on. (see attached image or use my .3mf file)

Perimeters:  2

Infill: 15%