MX Compatible Keycaps Similar to F10 Profile

Print at 0.15mm layer height. Models should be in correct orientation for printing. Tolerance at mounting point is 0.10mm on either side which makes for a snug fit. If your printer isn't very good at dimensional accuracy, you may need to scale up a bit. I plan to add models with different tolerances to negate the need for scaling in such cases.

Currently, I have included one smooth 1u keycap and one homing 1u keycap. The homing keycap has a 8.0mm diameter circle recessed 0.3mm into top of the keycap. This adds just a bit of tactile homing to otherwise difficult to navigate keycaps. I plan to add a 2u POS style keycap. If there is interest, I may attempt other more common keycaps sizes.

Pictured keyboard: Keebio Iris rev4