Prusa balance game Remix

Components required for assembly:

• Magnets: 6mm x 3mm = 26 Pieces
• Screws: M3 x 16mm = 2 Pieces
• Screws: M3 x 6mm = 8 Pieces
• M3nN o M3n = 8 Pieces
• Double-sided adhesive

Each part needs to be printed only once without supports

1. After printing all the parts, join the 4 Case parts (A,B,C,D) with the M3x6 screws and nuts.
2. Apply some double-sided adhesive strips on the Base A component and fix it in the center of the structure.

To mount the magnets, I recommend installing all the ones on the covers first, and taking advantage of their attraction, attach another one to each magnet so as to be sure of the direction. Once this is done with the cover in position on the base, push the magnet inside the location, the only magnets that need to be glued are those of the game component, in my remix there is a false hole that gives you the correct position of the magnet, if you have already printed from the original model, just attach the 4 magnets to the cover and using decoration glue, add a drop to each of them, finally place the game part and wait for it to dry.Finally install the last 2 magnets on the Base parts A and B, and screw the 2 M3x16 screws to the handle.

• The internal height is very precise, I recommend placing the components on a flat side for a perfect closure.

Added magnet locations to the game and split the base to fit the container