Nassenheider Inverto replica - turnable decapping device for honeycombs

Turnable device for decapping honeycombs (replica of "Nassenheider Inverto").
16
110
0
1655
updated October 1, 2024

Description

PDF

Turnable device for decapping honeycombs (replica of "Nassenheider Inverto").
Especially usefull for using a hot air decapping gun in one hand.

Application video original:

You will need:
-) 1 x 2020 aluminium profile type 6 B, length = 377 mm (for austrian "Einheitsmaß" with a length of 370 mm)
-) 2 x 2020 aluminium profile type 6 B, length = 130 mm (for austrian "Einheitsmaß" with a length of 370 mm)
-) 2 x 2020 internal corner brackets type 6 B
-) 2 x 2020 type 6 B M5 hammer nuts + bolts
-) 6 x M4 bolts + nuts

Use the drilling template to drill the four 4 mm holes inside the decapping box (do not scale the pdf when printing, otherwise the dimensions do not match!).

Edit: 08.07.2020: I think it's better to not mount the two short beams on the side of the long one like I did but on the upper surface. It's then easier to change the distance/width of the frame spacers because they are moveable.

Print Settings

Printer:

HEVO RS

Rafts:

No

Supports:

No

Resolution:

0,3

Infill:

35

Filament: Extrudr PLA white

Category: Outdoor & Garden

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License