Canyon Spectral:ON Water Bottle Adapter for Fidlock YT Thirstmaster 5000

Canyon was sold out of their proprietary water bottle cage so I came up with a solution to use my YT Thirstmaster 5000 Bottle from my YT Izzo.
I remixed this adapter from Bikernickmn: https://www.thingiverse.com/thing:6340762
I made it long enough to accommodate YT's proprietary Fidlock base plate. I also switched it to use threaded inserts because I find them much more convenient than nuts.
I really like the Izzo bottle because it is uses the Fidlock system so it never falls off in the rough stuff. The YT bottle has a higher capacity than anything Fidlock makes and in a shorter footprint.

Here is what you need to complete it.

1x Mx12mm Button head screw https://www.amazon.com/dp/B095YQ9W7C
2x M5x8mm Button head screws https://www.amazon.com/dp/B095YQ9W7C
2x M5x20mm (or 18mm) Button head screws washers (washers optional) https://www.amazon.com/dp/B095YQ9W7C
2x M5 Threaded Inserts: https://www.amazon.com/dp/B08T9W17CR

YT Thirstmaster 5000 Bottle Set (Includes Bottle, Fidlock TWIST Bottle connector, YT Fidlock Mount)
(FYI the bottle alone does not come with a Fidlock TWIST bottle connector)
US Link: https://us.yt-industries.com/products/parts/izzo/mk1-2020-current/338/thirstmaster-5000-bottle-set-izzo-mk1-szepter-mk1/
EU Link: https://www.yt-industries.com/products/parts/izzo/mk1-2020-current/338/thirstmaster-5000-bottle-set-izzo-mk1-szepter-mk1/

I printed in ASA because I had it but I imagine PETG would be just fine. It should be strong enough for PLA but be careful with that outdoors in hot climates.

The bottom two holes are a bit snug so you may need to drill them out. 
I have included a sliced version that enlarges the bottom two holes so you should not need to enlarge them with that version.
 

I remixed this adapter from Bikernickmn: https://www.thingiverse.com/thing:6340762
I made it long enough to accommodate YT's proprietary Fidlock base plate. I also switched it to use threaded inserts because I find them much more convenient than nuts.