Because using my phone while riding the bike (e.g.: navigation) needs a huge amount of battery, I decided to buy an external battery pack and to design a holder for my mountain bike.
It suits for the Anker PowerCore 10.000 mAh but I also added the CAD-files, so you can customize it yourself for other power packs.
Dimensions for the power pack:
width = 63 mm
thickness = 23 mm
height (until 1. LED) = 70 mm
I am also using this bike mount for my Samsung Galaxy S3 where I added a small hole for the charger:
http://www.thingiverse.com/thing:52901
It should perfectly fit under the stem ("Vorbau" in german !?) with a diameter of 36 mm.
For assembling you will need:
4x M3 bolts with a minimum length of 15 mm
4x M3 nuts.
Maybe the third hole isn't necessary, but I added it for safety reasons.
The 4 LEDs which indicate the power level are still visible upon the upper edge.
26.07.2016: I printed & tested it on my bike an it fits perfectly without any kind of rubber between the 2 parts. Also the power pack has little free space.
Printer Brand:
RepRap
Printer:
Prusa i3
Rafts:
No
Supports:
No
Resolution:
0,1 mm
Infill:
15 %
PTC Creo 3.0
Category: Sport & Outdoors
The author marked this model as their own original creation. Imported from Thingiverse.