Prusa XL Nozzle Holder

Printed in PETG, though any material would likely work.

Printed with two colors, but colors can be chosen or reworked in Prusa Slicer if you don't have a 2-color machine. Printed with some supports under the mounting tab. Printed at 0.2mm Structural layer height. Circles are 1mm high. Text is 0.6mm high.

I remixed the model in Solidworks to make changing the text easier. The next was added in Prusa Slicer, so you can edit the 3mf file to suit your nozzle selection.

Next step might be to make the model parametric for any number of nozzles.