Bambu P1S/P1P/X1C Low profile Riser with ventilation and lighting

I liked the profile/printability and lighting layout of the original design, but I did not like the seams in the centre of the part, I prefer to hide the seams at a colour change. I also did not have a need for venting out the front or back. I also did not want the hinged cover plates on the vents, that was just a personal preference on appearance.  My design centres the vents on the sides and uses a cover plate with 3mmx6mm magnets. The seams are at the corners allowing you to print the corners out of a different colour thereby creating an illusion of it being manufactured. I also resized the locking pegs to create a tighter joint. 

I wanted to utilize the interior USB connection to power my lights so the wire passthrough has been removed. I used these lights and they are nice and bright. 

https://www.amazon.ca/dp/B0C2P6Y9QN?ref=ppx_yo2ov_dt_b_product_details&th=1

There are no changes to the interior dimensions of the model. I also used the TPU light covers from the original creator and they work perfectly. 

NOTE: I increased the outer wall by 1.5mm from the original design, this is because I printed mine out of ABS which tends to shrink, I don't know how tight this will be for anyone printing with material other than ABS.