CUTTING BOARD HOLDER

A model of a cutting board holder for the kitchen.

Dimensions are shown in the photos.

Recommended material PETG. Choose non-hazardous materials that do not absorb moisture!!!

The layer height, fill, number of circuits and nozzle diameter can be chosen freely (I do not recommend less than 2 circuits and 5% fill), the model in the photos is printed with a nozzle diameter of 0.6 mm with a layer height of 0.4 m.

You will also need 8 M3x8 or M3x10 allen head screws. The screws are covered and recessed in the holder, so they will not be in contact with the damp substrate the holder is standing on.

I recommend to use PETG material, choose non-toxic materials that do not absorb moisture!!!

Recommended nozzle 0.6mm, layer height 0.4mm.

Any setting is possible (the number of perimeters should not be less than 2, the filler to use 5% or more).