A Simple Christmas Tree

Imagine being able to make a Christmas tree with just 3 pieces.

Done?

So,  this is the perfect project for you! You just have to print, assemble and enjoy!

For this project I used two types of filament: 

• Prusament PETG green transparent for cone and cone support
  https://www.prusa3d.com/it/prodotto/prusament-petg-neon-green-transparent-1kg/
   
• Eryone Wood PLA for the base
  https://www.amazon.it/ERYONE-Filamento-Stampante-Precisione-Dimensionale/dp/B085M1SYFC/ref=sr_1_5?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=153WEANW9XYIO&keywords=eryone+wood&qid=1702137450&sprefix=eryone+wood+%2Caps%2C113&sr=8-5
   

For all prints i reccomend 4 perimeters and 4 top and bottom layer. Infill 15%

If you want to make your tree more Christmassy, I recommend you insert a battery-powered candle inside the base

(I bought these https://www.amazon.it/dp/B009S7YR6Y?psc=1&ref=ppx_yo2ov_dt_b_product_details )

The instructions for assembly are very simple:

1. insert the "cone support" into the "base" and insert the candle;
2. insert the “cone” at the top of “cone support” and gently pull down;
3. insert the flap of the "cone" in to the “cone support” ;
4. light on the candle and enjoy!