Christmas Tree Star

For video of LED star in action visit:

https://www.facebook.com/groups/fkthat3dprintit/permalink/989221982182215/

Christmas tree star to be used with individual addressable LEDs and WLED on an ESP32.

Print 2 of the Main Christmas tree stars, 1 of the inner star and 1 of the tree connectors.

Make sure you print it in 0.15mm layer heights so that you don't have to print it with supports. 

To assemble, stick the addressable LEDs to the inner star, slide inner star onto the Christmas tree star half, and then slide the second Christmas tree star half on the other side, making sure the cable is between the circle end. Thread the connector though the tree attachment slide the attachment up and twist to lock on.

All parts attach by clicking into place, so no gluing is required. 

Please feel free to remix, I've allowed for the tree attachment to be interchangeable so if you need a different attachment for your tree, or to create one to sit on a table it is totally customisable for your needs.