Medieval knight armor for DUMMY 13

Frame

To achieve wider range of movement, I had to modify 4 pieces of frame parts. Don't forget to print them. Rest of the frame parts are the same as the original DUMMY 13. It is recommended to print frame from PETG.

Armor print instructions

• 0.2 mm, 3 perimeters
• Parts are pre-oriented to the printbed.
• Some armor parts require supports. Namely: armor_helmet.stl, armor_hip_left.stl, armor_hip_right.stl, armor_chest.stl, armor_knee_left.stl, armor_knee_right.stl, armor_visor.stl

For your convenience, provided are 3mf files with all the necessary parts and settings for Bambu and Prusa. They have been tested and proved they're working.

Assembly

For assembly, please follow BUILD GUIDE. Some steps are slightly different from the original. Note: kneepads might use a drop of glue to hold better in place.

Four frame parts are different and need to be printed: 2x-frame-clavicle, 2x-frame-forearm, 2x-frame-upper-arm, frame-head. Hands have been slightly enlarged, it's up to you to print them too.