Greenhouse for planter / pot

UPDATE (05/10/2020):

Added new files for the dome roof to be able to customize the width of the greenhouse:

Small:

• DomeRoof_Arc_50mm_Left
• DomeRoof_Arc_50mm_Right

Minimum Width: 50mm (just one half of roof dome) or 100mm using the two

Medium:

• DomeRoof_Arc_90mm_Left
• DomeRoof_Arc_90mm_Right

Minimum Width: 90mm (just one half of roof dome) or 180mm using the two

Large:

• DomeRoof_Arc_150mm_Left
• DomeRoof_Arc_150mm_Right

Minimum Width: 150mm (just one half of roof dome) or 300mm using the two

You can connected the right/left parts using the pillars with the length that you want

I need a customizable green house for the deck planter that I got at my window. I started to print the famous Greenhouse-Dome https://www.thingiverse.com/thing:1482704

But after print many pieces I realized that this will never work in a rectangular shape.

So I designed the connectors and the top, to fit better in the rectangular shape. Also the bottom clippers now are designed to directly clip at the border of the planter holing the plastic.

All the elements that I designed can be combined with the Greenhouse-Dome, so you can combine both system as you wish and build shapes in unlimited ways.

The Idea is to leave one side (the one that you need access to the interior) with the plastic holder with some clips, making easy to open/close the greenhouse.

I got some spare clips from my filament spools and surprise! they are perfect to clip the plastic to the pillars https://www.thingiverse.com/thing:42528

I have pending to design more elements, like new arc roof that allow different width and I got some ideas to improve the window to have more easy access to inside. But what I got now works perfectly for me, but if people start to like this designed and request more options I will expend some time working on that.

Thanks!

Note: the height and the length are easy to customize adding more elements/choosing longer/shorter pillars. But the width will need to be resized in the arc dome (now is 180 mm) and in the clippers for the pot, once you resize this elements take in consideration that the holes will resize too.

Print Settings

Printer:

Sidewinder X1

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2

Infill:

20

Filament:

White Transparent

Notes:

No need of support, just if you want more nice fit of the pillars into the holes you can add the support from the base.
All the elements are designed to be easy printable.