Gridfinity glue holder

Vase mode Gridfinity

This parametric Gridfinity bin is designed to hold a cylinder (provided model has diameter of 21mm) object. It fits most small glue sticks, but can be customized to different sizes.

Designed to be printed in Vase mode, it uses under 10 grams of material, a huge saving compared to other glue stick holders.

Print Settings

• for strength, I recommend using a thick line width above 0.6mm. You can print lines much thicker than your nozzle as long as the flow rate is considered. (e.g. printing a 0.8mm line with 0.4mm nozzle) I printed it at 0.5mm layer height and 1.0mm width using a regular 0.6mm nozzle.
• 1mm solid bottom layers.
• Recommended material: PETG

Tip: turn off cooling fan when printing with transparent PETG for a unique look!

Work in progress!

if you have any suggestions on the design, please leave a comment! Thanks and happy printing ;)