A little mod to keep K1's door open.
48
249
3
1727
updated January 19, 2024

Description

PDF

I've designed this very simple tool to keep the door wide open while doing maintenance of the printer.

Printing tips :

  • Layer height: 0.2mm
  • Wall loops : 3
  • Bottom and top shell layers: 5
  • Sparse infill density : 15%
  • no support needed

Filament :

  • about 1.96 m of META PLA, Hyper PLA or PETG.

Material :

  • 2 M3×8 hex cap screws (thanks to Colin for confirming that the original screws are too short).

Tags



Model origin

The author marked this model as their own original creation.

License