Christmas flexi tie/ cravatta flessibile di natale

The tie is fastened to the first button of the shirt. the knot has a joint to slide the button inside.

how to print a christmas tie 

first print plate with inside (green) of the tie and knot connector

second print plate with outside of the tie (red and white) and knot

Christmas-themed accessories for tie

how to assemble 

(next to the component in the photo you will find the name of the file)

-knot (use a piece of filament to assemble the knot connector. heat with a flame and flatten the ends of the thread to prevent it from coming out))

-extra length (optional)

-part 1 (green) + external (red)

-2 pieces of “tie part 1-2-3-4 connector” (white)

-part 2 (green) + external (red)

-2 pieces of “tie part 1-2-3-4 connector” (white)

-part 3 (green) + external (red)

-last 2 pieces of “tie part 1-2-3-4 connector” (white)

-part 4 (green) + external (red)

to connect the accessories it is necessary to remove a single piece of the tie where you prefer. the accessory is already printed with the piece.

Special thanks to @BrettSilva_480717 for a design and @jbergmans (thingiverse.com).

I recreated the various pieces of the tie to speed up assembly. I also made some Christmas-themed accessories for tie.