Handheld canned pet food grinder

Handheld grinding tool for canned pet food. Sized for standard 13oz / 370g can. Simply open the can, hold it horizontally and twist the blades into the food over the pet bowl. The ring in the shaft is placed to indicate the halfway point in the can when grinding. Vary pressure and turn speed to change size of food chunks produced.

Printed on MK3S, but included a shorter version for the Prusa Mini (Untested, but the only change is the height)

Print settings I used:

• Material: PETG (PLA likely works but PETG is slightly more flexible)
• Perimeters: 3
• Layer Height: 0.20 mm
• Infill: 30% (may not be necessary)
• Supports: None