German Nutcracker - Traditional

The all time classic, 

a Traditional German  Nutcracker!
 

I've  designed this one based on a real woodcrafted piece of my Grandfather.
As i wanted to practice on designing, i gave this one a try! Tolerances are not high, so everyone can assemble it. If it ends up tight and you're using PLA. Soften the material carefully with a lighter👊😝

Important!

I recommend printing “1. Scaled & correct orientation (recommended)” this contains the scaled up version at 200 percent, inlcuding the correct orientation.
The 2nd Folder “2. Original 3mf FIles (Scale up between 150-200 percent)” is for scaling it yourself and contains the 3mf Files. Note that the original size is to small.

All the parts are printed with a layer height of 0.2mm, some parts are better printed with a Brim. If you guys want me to be specific with the Color of all the Layer Changes, let me know!

Here are the Details!
 

• Almost entirely Support free! except for the one part “Hat - Front Decal”.
• Multicolor! Can be printed with a single color Extruder
• Functional Jaw (not intended for cracking actual nuts)

Share your Results and Tag me on Instagram!
 

https://www.instagram.com/chaymberr_crafts/?hl=en

Looking forward to your prints! 

Happy Holidays!🥁🎁🍻👊😝

LOG:

• 04.01.25 - Changed name of "5. Hinge & Joint" into “5. Arm joint” and added notes to add clarity.