HAUNTED HOUSE MARK 1 WITH 3D MOON

SUPPORT MY WORK

If you appreciate my designs and would like to support my work, or if you're interested in a commercial license to sell my models, here are some options available:

• PayPal Subscription Plan: Subscribe Here
• Patreon Site: Join on Patreon

Thank you for your support! If you have any questions, feel free to reach out at [email protected].

HAUNTED HOUSE MODEL - OVERVIEW AND PRINTING GUIDE

Model Features:
- Includes: A beautifully designed haunted house with a choice of two moons: 
- 3D Lithophane Moon (114mm diameter)
- 2D Lithophane Moon (114mm diameter)

• Design: No supports needed for printing; the model is designed to incorporate lights and serve as a spooky lamp.

Printing Specifications:

Filament Choices:

• Polyterra PLA
• PolyLite PETG (recommended for windows; transparent PLA is also suitable).

Layer Height: Standard layer height can be used; no specific recommendation noted.

Slicing and File Management:
- All STL files are included in a zipped folder, organized for easy navigation.

Build Plate Requirements:
- Minimum Size: 205mm x 191mm x 128mm.
- If your build plate is smaller, scale the model down by 5% to 7%.

Estimated Model Size (Fully Assembled with Moon):
- Dimensions: 204mm (8.0in) x 281.5mm (11.1in) x 304.2mm (12.0in).

Lighting Options:
- Interior Lighting: Recommended to use cheap battery-powered wire Christmas lights.
- Moon Lighting: Designed for a USB small light bulb like Toolmoon. The model can accommodate:
- One bulb with a vertical connection
- One bulb with a 90° connection
- Wires can be routed out of the model through a cut-out at the back next to the back door steps.

Assembly Instructions:
- Full step-by-step instructions are provided in the zipped file. Minimal glue is needed for assembly.

Contact Information:
If you have any questions or need assistance, feel free to reach out!

Fulv