Wanted to print this on the Prusa XL but the Auto Arrange or Auto Center hecks everything up. If anyone knows how to disable it please lmk.
Multi-Colour Classic Dalek - 1/6 Scale
This is a one sixth scale classic Dalek from Doctor Who!
Designed to be printed using a multi-colour 3D printers.
68
261
4
1438
updated December 7, 2023
Makes
Comments
Great print. It was a lot of fun to create and impressive to show to other fan friends! Thanks for some great work. I’ll have to post the little makeshift caster I made because I really wanted it to be able to roll around slightly off the ground ha.
All printed on Prusa XL except the eye stalk, it needed 4 colours, only have a 2 tool head at the moment. intend to get the kit to upgrade to a 5 when available. But excellent model. Now printing a classic dark grey one
@KostyantynPol_996395 wow that's such an excellent print, and so fast!
Did you use a multi-material printer, or did you scale and stick the bits together? :)
@Audrey2_1535245 It took quite a while. I used the Anycubic Kobra GO and printed all the parts separately. All the parts are glued together, except for the bottom hemispheres. They turned out larger in size and didn't fit into the openings, so I had to trim them. But after that, each hemisphere fit perfectly in its place without the need for glue.