Wemos D1 mini with locking pin hole + LED Strip Case
This case fits an Wemos D1 mini board with LED strip connector soldered on top.
10
49
1
366
updated
December 6, 2023
Description
PDFNo supports needed. Printed in PETG.
The connector itself is stuck to the board using some nano tape, but some hot glue would do the job too. The locking pin can be used and does not need to be cut off. Fits in the top
Model origin
The author remixed this model.
Differences of the remix compared to the original
The connector's locking pin works and does not need to be cut