ICandy Peach Adapter Bracket

ICandy peach pram brackets for storing the cot and car seat adapter risers once folded down and during use.

This is a well built pram, but we found it irritating having to remember to take the riser brackets for the cot and car seat separately from the frame. These brackets allow both to be clipped to the frame and have been designed to clear the cot and frame in use and when folded down (which turns out to be a little challenging).

The inner brackets have their detent squared off and the button can be pressed to release them once clipped in. The outer brackets (car seat risers) have a rounded friction lock detent, as the button is not accessible when clipped in and this was the only orientation that seemed to make sense.

You will also need 8 x M4 x 20mm cap head bolts and 8 x M4 nuts to clamp the clamshell design to the frame as shown.

NOTE: THIS IS A THIRD PARTY ADD ON AND IS NOT RECOGNISED / TESTED BY THE OEM. PLEASE USE AT YOUR OWN RISK. I ACCEPT NO LIABILITY FOR ANY HARM OR DAMAGE CAUSED TO PERSONS OR PROPERTY.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

No

Supports:

Yes

200

Infill:

25