Raspberry Pi IR Camera Mount (Pan & Tilt manual)

HOTTT FRESH OFF THE BED!!!!!

IR raspberry pi camera mount.

manual pan & tilt with screws.

Use existing hardware for mounting camera. SNAP FIT CAMERA MOUNT! (rounded edge not triangle soo not that precise)

I must have printed this like 20x's! In order to get this to fit right!

Use super glue to attach parts together.

This camera type lights ALWAYS stay on :( BUMMER!

While "ON" it does get a little warm for only drawing about "0.20A" of current.

I wouldn't recommend having a camera ALWAYS ON for that it does get the CPU HOTTER! with heatsink and fan! 105F! Which I would say is the actual limit! Without camera on it does drop dramatically! to 90 or less.

-0 Diameter of screw is 3.1mm

Length is 52-54mm (I think it came from DVD tray? "scrap screw")

Used in Raspberry Pi IoT https://www.thingiverse.com/thing:4992092