Prusa Nextruder Nozzle Case

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.

https://paypal.me/muddymaker

Prusa nextruder nozzle case. 

Print the clips with PETG@100% infill. The TPU seal is optional but if you are going to print it make sure you print the seal with 1 to 2 perimeters/walls and 0% infill, the seal needs to be squishy so the lid can close properly and seal correctly.

You will require 6 M3X25mm fasteners, they all screw into the plastic.

No supports needed.

There is an MMU version of the lid with the Prusa Research Logo and a nextruder nozzle silhouette and a plain version for folks that do not have MMU capabilities. 

Print the colour code dots to whatever colours you want to denote your nozzle sizes and glue in place in the allocated spots in the bottom tray and lid for quick and easy identification of your nozzles. Colour code legend is in the underside of the lid.

In the bottom tray there is enough space for 3 spare nextruder nozzles, including the Obxidian variant and a space for the V6 adapter nozzle and storage for up to 10 V6 nozzles. There is also space for a spare heater block and silicone sock. The top tray is handy to store your nozzle spanners and spare complete fully built hotends etc.

NB: If you are going to be transporting your case a lot I suggest sticking on a couple of strips of self adhesive 3mm foam on the underside of the top tray and lid. Place the foam strips in a way to where they do no collide with the central handle on the bottom tray, that way it will keep your nextruder nozzles locked in tight to stop any rattles during transport:)

Happy printing.