Mass Effect Renegade Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base.
50m
1× print file
0.20 mm
0.40 mm
13.00 g
24
77
1
376
updated April 12, 2019

Description

PDF

You can glue a 10 x 1.5 mm round magnet in the base.

Print instructions

Recommended infill angle:

Low speed and high temperature will create a shiny top surface.

There are "holes" inside the model to make some of the top layers more uniform, and they were created with 0.2 layer height in mind.

If your top surface is not flat & shiny and you see scarring, then make sure to check this guide: https://bit.ly/2UtN0I1

Tags



Model origin

The author hasn't provided the model origin yet.

License