Frankford Arsenal X-10 Case Feeder Guide

If you have a Frankford Arsenal X-10, you've likely had it jam up due to a hung case going into station 2.  This is caused when the case shuttle isn't able to fully seat the case into the shell plate.

This add-on goes under the case feeder cover and provides a guide for those cases that don't quite make it all the way onto the shell plate.

Print Settings

Set resolution to 0.2, wall count to 6, and your top and bottom layer count to 6.

Arrange the piece with the loop facing up. Refer to the image showing the print orientation.

Post-Printing

No post processing needed.  Simply remove from the printer, and you're ready to use!